Posted on 17 July 2019 - 06:46 AM
I am trying to use printer but it dont work and i know that the server I play on allows printerPosted on 17 July 2019 - 06:48 AM
If you want to turn on printer, press "-" and printer should appear on "off" on top, turn it on.Posted on 17 July 2019 - 06:54 AM
I have it on and stuff just not placeing the blocksLast edited on 17 July 2019 - 07:03 AM by Dominos1
https://imgur.com/a/bARwEG6Try copying my settings, if you are in survival mode, make sure you have all the necessary blocks.
Posted on 17 July 2019 - 07:03 AM
okPosted on 17 July 2019 - 07:07 AM
did not work still not plaaceing any blocksPosted on 17 July 2019 - 07:09 AM
Make sure that there is a real block next to the schematic.(where you can stand and where it is connected to it)Last edited on 17 July 2019 - 07:10 AM by UnknownFact
Does it show your schematic? https://imgur.com/ekKyxVwDo your Printer settings look the same (is it turned on)? https://imgur.com/hW2FJLi
Posted on 17 July 2019 - 07:10 AM
yes it shows and all the settings are the samePosted on 17 July 2019 - 07:11 AM
^ look at my message above it might help.Posted on 17 July 2019 - 07:11 AM
yes there is a real block next to itPosted on 17 July 2019 - 07:12 AM
Oh, are you sure you have all the blocks or at least the blocks you're going to place?Posted on 17 July 2019 - 07:12 AM
yesPosted on 17 July 2019 - 07:13 AM
Because if there is a block next to it, it should start placing if you have "place instantly" turned on and no place delay.Posted on 17 July 2019 - 07:15 AM
everything is right on settings and have all blocks and there is real blocks next to itPosted on 17 July 2019 - 07:16 AM
Once you've done that. try restarting your game, and 2. delete and put back the schematica but this time it'll probably work because you've configured everythingPosted on 17 July 2019 - 07:21 AM
nope still not placeingPosted on 17 July 2019 - 07:23 AM
I can record it if you need me toPosted on 17 July 2019 - 07:26 AM
OkPosted on 17 July 2019 - 07:27 AM
@Rigner do we send some kind of notification that the server has enabled Printer Mode?@Earthdragons1 you might want to verify they have printer mode enabled properly, there was an issue at first with the config file which we fixed.